Bespoke Installation Gallery
Before installation
During
We replaced the existing fibreglass garage and entrance doors with two new garage doors and side door from Garador UK
After instillation
Before installation
During
Originally, this client opened his timber side sliding doors to allow pedestrian access, although the garage door was used infrequently. We installed a steel post to partition the opening and then installed a UPVC side door with enough clearance for the client's lawnmower. We then installed a Hormann sectional door
After Installation
Before Installation
During
For this installation, we removed the existing garage door, side door, timber frame and glazing. We then fabricated a timber sub-frame and overclad it, which then allowed us to install a Hormann garage door in anthracite to match the existing front door
After Installation
Before Installation
During
The client wanted to gain width in his workshop to allow access for a large car. We removed the existing door, created a timber subframe and over clad with timber cladding. We were then able to install a Seceuroglide composite door, finished in red, to the rear as the new opening.
After Instillation
Before Installation
During
After Installation
Job title
Before Installation
During
This client had an existing carport to the side of the property, which we converted into a proper garage. We installed a timber sub-frame, which was then overclad in UPVC to make good. The door was then installed to the rear of the opening.
